Beer's Tasted - Svea IPA

Another ale from De Struise Brouwers of Oostvleteren Belgium, limited availability in the US.  Made with barley, oats, wheat and rye, it pours a cloudy, deep copper color with a dense, think & lasting head.  It has a barnyard hay aroma. The noble hops are smooth and lasting on the palate, with notes of malt and fruit. Comes in 11.2 oz bottle and weighs in at 7% ABV.  A very good ale that I'd rate a 90+.

Bottling & Pondering

Tonight I bottled the O Tannenbock Spruce ale. It is here where I appreciate brewing in 1-gallon batches, as I only had to sterilize 5 22-oz bottles.  Clean-up was a breeze as well.

I never took a hydrometer reading, so I don't have a sense for the ABV.  The overall flavor was quite sweet, perhaps due to the 3 oz of maple syrup used to prime the bottles.  The spruce flavor was not apparent. If it's not great, I won't be wasting a large batch!!

Tasting the unfinished beer also made me ponder what Simcoe hops are.  Apparently it is a relatively new (2000) American hop, from the Yakima Chief Ranches of Sunnyside WA.  It has a very distinct aroma of citrus, grapefruit and pine and is likely a good complement to the spruce bough.  It is mostly used as an aroma hop, but due to its low"alpha" acid cohumulone makes this a good bittering hop.  Noble hops tend to have low cohumulone acids.

Beer's Tasted - Old Fisherman's Ale

Found a limited quantity ale from De Struise Brouwers in Belgium, called Pannepot, 2010 vintage.  This quad ale had a rich, dark color and weighed in at about 10% ABV.  With a malty nose, it is brewed with spices and tastes of burnt caramel and raisins with hints of honey and vanilla.  A very good sipping ale that would pair well with sweet appetizers or desserts like creme brulee.  Like many Belgian ales, it is not overly hoppy with its Bramling Cross, Hallaertau MF hops.

Beer Advocate had this to say about De Struise Brouwers..."Set up by two friends and a Brother-in-Law who started brewing beer in a barn at a local farm. Went commercial in 2003, but with no capital the beers were brewed on the Brasserie Caulier Plant. In February 2006, the decision was taken to move production to the Flemish SA Deca Brewery in Woesten-Vleteren (working) parts of which date from 1917. Exports its beers to Canada, Denmark, Italy and the USA with plans for China, India and Australia in the beerline."

Spruce Boch

Thanks to Maureen, and the folks at the Brooklyn Brew Shop, I have a new approach to brewing -- fermenting in 1 gallon batches. The whole premise behind this method is that people who live in cities typically don't have the space for brewing in large, 5-gallon batches. I like this idea for several reasons:

• Fewer bottles to wash out, sanitize, fill and cap
• Less beer on-hand, especially when the batch was not so great or just plain tired of it
• I don't drink enough beer to go through 5-gallons (and most of my friends don't drink)
• Not as much heavy lifting

Of course with all things good, there are a few downsides to this approach:

• Takes the same amount of time and equipment 
• Have to use smaller amounts yeast and hops (I'm hoping to store and freeze these, respectively)

The first 1-gallon batch I'm attempting is from the Brooklyn Brew Shop's Beer Making Book. This book has 52 seasonal recipes organized by Spring/Summer/Autumn/Winter. From the winter section, I decided to brew O Tannenbock Spruce Ale, a dark and piney beer inspired by our fore fathers who were rumored to have brewed with molasses and spruce. This recipe sounds like the perfect winter ale.  I had to forage for the spruce sprig, worrying that our (still hanging) Christmas wreaths might have been treated with some preservative.  I was able to find a sprig at the Presumpscot Elementary school.

The Mash
1 3/4 c water
1.5 lbs pale malt
0.1 lbs carapils malt
0.2 lbs flaked barley

60 minutes @ 152-degrees, sparge with a gallon of water @ 170-degrees.  Recirculate the liquid through the grains once.

Simcoe (L) and Chinook (R)

The Boil
0.12 oz Chinook hops, divided in half
0.04 oz Simcoe hops
1 six-inch long sprig of spruce
1/2 c molasses

Begin the boil.  Once the foam subsides, add half the Chinook hops (I used pellets).  Add remaining after 30 minutes, the Simcoe hops (I used dried flowers) after 50 minutes, and the spruce sprig after 55 minutes.  At the 60 minutes mark, add the molasses and stir to dissolve.  Cool to 70 degrees in an ice bath, about 30 minutes.


Pitch the Yeast
1/2 packet of English ale yeast, Safale S-04

Collaboration with Rob Tod of Allagash, Portland ME

This went into a 2-gallon plastic pail for the primary for a week, and into a 1-gallon glass jug for the secondary.

As I write this, I'm enjoying a Very Speciale Belge.  A collaboration between Rob Tod of Allagash Brewing here in Portland, ME and De La Senne Brewing of Brussels.  This is an excellent Belgian style that is somewhat non-traditional in that it has a fairly high hop rate.  An A+ ale that I highly recommend, although the availability is limited.

Advice for the weekend, provided by my brother Jim. "Don't sweat the petty things, and don't pet the sweaty things."

IPA Failure & Success

It's been a busy couple of months working long hours and trying to get outside more with the arrival of spring here in Maine...finally!  Since my last post, I have bottled, aged and consumed the Palilalia IPA.  This brew has a deep copper color, a strong nose, a good solid head and has aged into a solid ale. 

After aging in my basement for 4 weeks, I put a bottle in the refrigerator for the weekend.  I opened, poured and tasted.  My excitement quickly turned to disappointment.  It had an off taste, and a long bitter finish.  Something wasn't right and now I have 5 gallons of the stuff.  What went wrong with my third batch of brew? 

Well, I decided not to react too quickly.  I'd give it a couple more weeks in the cellar and perhaps that would help mellow thing out.

A week or so later, it dawned on me that when I was washing the first  bottle out there were some particles stuck on the bottom.  In fact, I had to rigorously shake water to clean it out fully.  Maybe the bottle was contaminated!?!  Ah ha!  Let's get another bottle of this stuff in the refrigerator! 

Bottle #2... same dark copper color, aroma and head.  Looks and smells the same.  But alas, it tastes better!  In fact, it's pretty good!  Hmmm...  maybe all it not lost!  Well, in fact we have enjoyed 4-5 bottles of the Palilalia IPA and it's a darn good ale!  I really seemed to need the extra time 2-3 weeks in the cellar.

Final gravity was 1.012 and then I dropped my hydrometer and broke it :-(

Gypsum

I've been pondering the addition of gypsum in the IPA recipe.  What is gypsum and why is it an important ingredient in this IPA?

Gypsum is also known as Calcium Sulfate (CaSO4), a common brewing "salt".  It is a mineral that is quarried, and apparently was commonly mined in the districts around of Paris - hence the term "plaster of paris".  Gypsum is deposited from lake and sea water, as well as from hot springs and volcanic vapors - a deep earth mineral.

Who knew the uses of gypsum?  It spans the gamut of foods, water treatment, soil amendment, and binder for things like cement and clay.  And of course, gypsum is a key addition to gypsum board, or more commonly dry wall. In beer making, it is typically added to the mashing or boiling process.  Gypsum cripes!!

Charlie Papazian has a good write-up in his book.  In summary, the calcium (Ca) aids in the clarification of the wort and also helps to remove some of the tannins found in the husks of the grains.  Apparently if these are not removed, the beer can be hazy and well as have an "off" flavor.

The sulfates (SO4) add a dry, crispness to the beer.  Probably since this is an IPA, and that they tend to be drier, gypsum is added.  Papazian warns that over mineralization can really ruin a beer.  The type of brewing that I'm doing right now, where I'm leveraging malt extracts, I probably don't have to worry about adding minerals as it's probably already done in the malting process.  However since I'm doing partial grain steeping, some consideration must be for the tannin proteins that can be imparted.

I'll continue to follow recipes and add what they call for.  Here in Portland, we are lucky to have high quality city water from Sebago Lake.  It is a well-balanced water, neither too hard nor too soft.

On Wednesday night, I transferred the beer from my primary fermenter (a.k.a. my white bucket) to the secondary fermenter the carboy.  The foam, or kraussen, on the top was thick and viscous, while the brew itself had a heavy bread and hop aroma.  The hop sediment was quite significant as well.  It continues to ferment away in the carboy, and will probably do so for another week or so.

I also took a hydrometer reading, registering 1.022 gravity.  The initial gravity prior to "pitching the yeast" was 1.042.   Final gravity is supposed to be 1.014 - 1.018.  I need to learn more about gravity readings with a hydrometer, and what they specifically mean.  Perhaps my next post.

Stay tuned.  Bottling in a week or so!  The timing is good, since I'm down to my last two 22 oz. Bad Ass Mo Fo's (which I'm probably giving away to friends).  My last friends to try the BA Mo Fo had RAVE reviews!!

Spent Grain Wheat Bread

Spent Grain Wheat Bread

Since I've been making beer, Maureen has thought about making bread with the spent grains.  After some research, she settled on a recipe.  This morning she took the crystal malt and roasted barley spent grains from last night and made an awesome bread!!  Check it out in more detail at Lick the Batter.

This bread has a medium crust and an excellent crumb.  And you know what, it kinda tastes like beer.